金沙总站4066|手机APP下载

Industry information The current position:home > Industry information

To ensure the quality of cement pipes, the choice of cement is the key

Release time:2019-12-24    This article is read :839 次

Cement pipe making machine

     To ensure the quality of cement pipes, the choice of cement is the key.Cement pipe making machine is a kind of mechanical equipment for manufacturing cement pipes. When we use the cement pipe making machine to manufacture the cement pipe, if we want to ensure the quality of the finished cement pipe, we must have strict quality requirements for the raw material—cement:

     1. Prevent moisture and hardening when cement is stored. Because the cement will lose its original strength and affect the quality of the product after the cement has been dampened and hardened, and for those cements that have been dampened and agglomerated or hardened, they must be screened to screen out the agglomerated cement.

     2. Avoid the problem of frostbite when the temperature is too low. This problem mainly occurs in winter or in seasons with large temperature differences. If the cement products produced by the machine are frozen, the water in the cement products cannot be hydrated, and the water will freeze and swell, which will cause the surface to be gradually crushed and damaged by the surface and the inside.

     3. For products that have just been produced, they cannot be directly dried in the sun, and should be dried in the shade. If the cement is exposed to light after completion, it will lose its strength with the rapid evaporation of the water in it, and it may even lose its strength completely. Therefore, the cement products must be cleaned and replenished strictly before construction. After the production is completed, they must be covered and watered regularly until they are fully formed.

     4. After the cement products are finished, do not allow the grass roots to be dirty and soft when leaving them to dry. Because some cement products are made for direct use, and the cleanliness of the base layer is related to the degree to which the remaining base layers are firmly bonded or gripped. In some cases, especially when the original base layer is smooth, we must chisel and brush the base layer in advance to improve the firm adhesion with the base layer. As for the dirt, greasy, acid and alkali on the grass roots, they will have an isolation effect on the cement products, so they must be cleaned up.

    Tai'an Renhe Manufacturing Machinery Equipment Co., Ltd. produces high quality cement pipe making machines.

To ensure the quality of cement pipes, the choice of cement is the key
Previous:Emergency plan for disposal of cement pipe mouldnext:Attention to small details can reduce equipment loss

All rights reserved:Tai'an Renhe Machinery Manufacturing Co., Ltd.     鲁ICP备13025187号-2        公示信息

Baidu
sogou